SAFETY CLAMP EN 14420 ALUMINUM



Download sheet in pdf format
"SPANNLOC type" safety clamp according to EN 14420-3 in Aluminum - Steel screws
Maximum working pressure: 25 bar up to DN 125 (for DN 150 and DN 200 the maximum pressure is 16 bar).

The size identifies the closing range compatible with the external diameter of the tube

Attention!
The seal is guaranteed only by tightening smooth pipes externally or on any smooth sleeves at the ends.

dn Max pressure closing field screws
13 25 22-24 M6x20
19 25 30-33 M6x20
25 25 34-36 M6x20
25 25 36-39 M6x20
25 25 40-43 M6x20
32 25 41-43 M6x20
32 25 43-46 M6x20
32 25 53-56 M6x20
32 25 47-49 M6x20
38 25 50-53 M6x20
38 25 53-56 M6x20
38 25 57-60 M6x20
40 25 53-56 M6x20
40 25 58-61 M6x20
45 25 58-61 M8x25
50 25 59-61 M8x25
50 25 61-63 M8x25
50 25 63-67 M8x25
50 25 69-71 M8x25
63 25 74-76 M8x25
63 25 78-82 M8x25
63 25 84-87 M8x25
75 25 85-89 M8x25
75 25 89-93 M8x25
75 25 94-97 M8x25
75 25 98-101 M8x25
80 25 94-97 M8x25
90 25 101-105 M8x25
100 25 111-115 M10x40
100 25 114-119 M10x40
100 25 118-122 M10x40
100 25 122-126 M10x40
125 25 143-148 M12x60
150 16 168-174 M12x60
200 16 222-229 M12x60