LOK SCP - Fitting Connector
ONLINE CATALOGUE › PIPES AND FITTINGS FOR HYDROGEN AND FUEL CELLS › STAINLESS STEEL SAFETY CONNECTIONS › LOK DOUBLE OGIVE FITTINGS
Download sheet in pdf format
Stainless steel connector to allow connection between LOK series fittings without the use of an intermediate tube.
Installation instructions
1. Remove the nut and ferrules from port 1 and place only the nut (without ferrules) on the port connector.
2. Using a wrench, tighten 1/4” from the hand-tight position. (1/8 turn for 1/8”, 3/16”, 2 mm, 3 mm and 4 mm)
3. Insert the other end of the port connector into port 2 and tighten the nut 1 1/4 turns with a wrench. For 1/8”, 3 mm, tighten 3/4 turn from the hand-tight position.
MINIMUM PACKAGE 10 PIECES
CONNECTORS BETWEEN FITTINGS IN INCHES:
CONNECTORS BETWEEN METRIC FITTINGS:
Installation instructions
1. Remove the nut and ferrules from port 1 and place only the nut (without ferrules) on the port connector.
2. Using a wrench, tighten 1/4” from the hand-tight position. (1/8 turn for 1/8”, 3/16”, 2 mm, 3 mm and 4 mm)
3. Insert the other end of the port connector into port 2 and tighten the nut 1 1/4 turns with a wrench. For 1/8”, 3 mm, tighten 3/4 turn from the hand-tight position.
MINIMUM PACKAGE 10 PIECES
CONNECTORS BETWEEN FITTINGS IN INCHES:
| CODE | DN | THE |
| inch | mm | |
| SCP-1 | 1/16" | 13.72 |
| SCP-2 | 1/8" | 10.35pm |
| SCP-4 | 1/4" | 24.64 |
| SCP-5 | 5/16" | 25.90 |
| SCP-6 | 3/8" | 26.16 |
| SCP-8 | 1/2" | 35.81 |
| SCP-12 | 3/4" | 37.33 |
| SCP-16 | 1" | 48.00 |
CONNECTORS BETWEEN METRIC FITTINGS:
| CODE | DN | THE |
| mm | mm | |
| SCP-3M | 3 | 22.20 |
| SCP-4M | 4 | 25.81 |
| SCP-6M | 6 | 24.60 |
| SCP-8M | 8 | 25.90 |
| SCP-10M | 10 | 26.10 |
| SCP-12M | 12 | 35.80 |
| SCP-15M | 15 | 37.40 |
| SCP-16M | 16 | 37.40 |
| SCP-18M | 18 | 37.40 |
| SCP-20M | 20 | 38.90 |
| SCP-22M | 22 | 39.20 |
| SCP-25M | 25 | 48.00 |
| SCP-28M | 28 | 63.50 |
| SCP-32M | 32 | 69.70 |
| SCP-38M | 38 | 81.90 |