SINGLE WAVE RUBBER COMPENSATOR type EF
These compensators are constructed with food grade white nitrile rubber.
They are equipped with revolving flanges in galvanized steel, made up of an elastic MONO ONDA rubber body, reinforced with a braid of nylon threads which make them resistant to the stresses due to the pressure during use and the movements they must absorb.
The sealing step between the joint flange and the counterflange is in turn reinforced with a galvanized steel ring which avoids (within the limits of use permitted by the joint) the removal of the rubber body from the flange seat, as well as give greater guarantees of non-deformability during use, a situation that could lead to leaks in the joint itself.
STRUCTURE :
Swivel flanges: galvanized carbon steel
Reinforcement step: galvanized carbon steel
Elastomer: special white synthetic rubber
Reinforcement: Nylon synthetic fibre
Rubber compound available: NITRILE
Maximum operating pressure: 16 bar
Burst pressure: 60 bar
Depression: 650mm/Hg
Operating temperature: -20 ÷ 100°C
Diameter nominal | Length | OR Hole | OR lip | Eligible movements |
Axial | Lateral | Angular |
inch. | mm | mm | mm | mm | compression | elongation | +/- | +/- |
1" | 25 | 130 | 25 | 50 | 30 | 20 | 30 | 30° |
1"1/4 | 32 | 130 | 40 | 69 | 30 | 20 | 30 | 30° |
1"1/2 | 40 | 130 | 40 | 60 | 30 | 20 | 30 | 30° |
2" | 50 | 130 | 52 | 86 | 30 | 20 | 30 | 30° |
2"1/2 | 65 | 130 | 68 | 106 | 30 | 20 | 30 | 30° |
3" | 80 | 130 | 76 | 116 | 30 | 20 | 30 | 30° |
4" | 100 | 130 | 103 | 150 | 30 | 20 | 30 | 20° |
5" | 125 | 130 | 128 | 180 | 30 | 20 | 30 | 20° |
6" | 150 | 130 | 152 | 209 | 30 | 20 | 30 | 20° |
8" | 200 | 130 | 194 | 260 | 30 | 30 | 30 | 10th |
10" | 250 | 130 | 250 | 320 | 10 | 30 | 10 | 5th |
12" | 300 | 130 | 300 | 367 | 10 | 30 | 10 | 5th |