CAMLOCK TYPE D
ONLINE CATALOGUE › FITTINGS FOR THE CHEMICAL AND FOOD INDUSTRY › CAMLOCK FITTINGS
Download sheet in pdf format
This type of fitting has been designed for the quick and safe connection between two pipes in the shortest possible time. By inserting the FEMALE version inside the female version you will quickly have a full passage mechanical coupling with the tightening via two lateral levers, whose eccentric on the fulcrum will obtain the definitive locking, via a pin or a spring system the locking stop is obtained safety of the two flaps. The seal is guaranteed by standard gaskets in NBR rubber or different materials depending on the fluid passing through.
The ends of the fittings can be supplied threaded, flanged for welding or hose holder.
In compliance with Military regulation AA-59326A.
Available MATERIALS : AISI316 STEEL, BRASS, ALUMINUM, POLYPROPYLENE
| DIAMETER NOMINAL | THREAD BSP | PRESSURE AISI316 BAR | PRESSURE BRASS BAR | PRESSURE ALUMINUM BAR | PRESSURE POLYPROPYLENE BAR | AISI316 NPT THREAD |
| DN015 | 1/2" | 10 | 10 | 10 | - | - |
| DN020 | 1/2" | - | - | - | 8.5 | - |
| DN020 | 3/4" | 17 | 17 | 17 | 8.5 | X |
| DN025 | 1" | 17 | 17 | 17 | 8.5 | X |
| DN032 | 1"1/4 | 17 | 17 | 17 | 6.5 | X |
| DN040 | 1"1/4 | - | - | - | 6.5 | X |
| DN040 | 1"1/2 | 17 | 17 | 17 | 6.5 | X |
| DN050 | 2" | 17 | 17 | 17 | 6.5 | X |
| DN065 | 2"1/2 | 10 | 10 | 10 | - | X |
| DN080 | 3" | 8.5 | 8.5 | 8.5 | 5 | X |
| DN100 | 4" | 6.5 | 6.5 | 6.5 | 5 | X |
| DN125 | 5" | 5 | 5 | 5 | - | - |
| DN150 | 6" | 5 | 5 | 5 | - | - |